Cisco Ccna 640-802, Ccent, And Ccnp Practice Exam Questions: Hdlc, Ppp, Ospf Routes, And More!

Which of the following is NOT true regarding a Cisco router's default settings? A. HDLC is the encapsulation type on Serial interfaces. B. Password encryption is enabled. C. Router interfaces will be closed. D. IP addresses are not assigned to the router's interfaces. Answer: B. By default, password encryption is disabled. You can enable it with the global command service password-encryption CCNP Certification / BSCI Exam: By default, how does an OSPF routing table indicate routes that were learned by the OSPF domain via redistribution? Answer: By default, those routes are marked "E2". CCNP Certification / BCMSN Exam: A switch has two paths to the root bridge. One is direct, the other goes through another switch. You want to lessen the delay that will occur if the current root port goes down. What Cisco feature can help? Answer: Uplinkfast can help. When the root port goes down, the currently blocked port will be placed info forwarding mode almost immediately. CCNP Certification / ISCW Exam: Users who telnet successfully into your router should be placed directly into privileged exec mode. What command will accomplish this? Answer: Use the command privilege level 15 under the VTY lines. CCNP Certification / ONT Exam: You're working with a serial interface set to T1 speed. By default, what queueing scheme is running on that interface? Answer: Weighted Fair Queueing (WFQ) runs on interfaces running at less than 2.048 MBPS speed, which is E1. google_ad_client = "pub-2311940475806896"; /* 300x250, created 1/6/11 */ google_ad_slot = "0098904308"; google_ad_width = 300; google_ad_height = 250; Look for more free Cisco CCNA 640-802, CCENT, and CCNP questions soon!

access point vs router