An IP Address is a numerical address that is assigned to a system for the purpose of linking it to the internet. This address is also recognized by servers that use it to respond to the particular device that is connected to the network. Whenever information has to be sent to any device, the devices IP Address is used for sending purposes. It is once again used when information has to be received by the device. Every system connected to the internet has an IP Address as without it, there is no possibility of connectivity. It is the sole means of device identification and is primarily used to communicate information. Every IP Address is a sequence of numbers, paired into groups of three, and separated by a dot. IP Addresses that lie in the 192.168.0.1 to 192.168.255.255 range are private. It should be noted that private IP addresses are non-routable, which means only one device connected to a network can use a particular address. 192.168.2.1 is a private IP Address that is used by router manufacturers such as Belkin, SMC and also by other manufacturers. As with other IP Address, this private IP Address can be used only once in a network. This means no two devices connected to a particular network can have this IP Address. It can be used again and again, so it can be assigned to routers connected on totally different networks. 192.168.2.1 is set as the default address by device manufacturers. However, users can change it to an IP Address that they prefer, by accessing the routers control panel, which can be accessed by typing it at the web browser and then pressing enter, which will in turn take the user to the configuration page, where you can specify necessary settings. google_ad_client = "pub-2311940475806896"; /* 300x250, created 1/6/11 */ google_ad_slot = "0098904308"; google_ad_width = 300; google_ad_height = 250; Usually a username and password is required and in most cases, it is usually set as admin.
access point vs router
Niciun comentariu:
Trimiteți un comentariu