DD-WRT Wi-fi Router Bridge Linksys wrt65gs and 160n

In this tips on how to information I might be showing you ways create a wireless bridge between a Linksys 160n wi-fi router and a Linksys WRT54GS wireless router that has been modded with the DD-WRT firmware. You might ask your self what is a wi-fi bridge.You additionally might ask your self why you'd wish to create a wi-fi bridge within the first place. Nicely a wi-fi bridge is if you join one router to another router with out utilizing any hard wired cables. You may want to create a wi-fi bridge for some of the following reasons.

Laptop are positioned at completely different ends of your home and you can not run a ethernet cable between the 2 router. You wish to hyperlink to you neighbors network so you may share internet service, files, and media such as music and movies. The possibilities are infinite in terms of networking routers together utilizing wireless.

For the wireless bridge setup I might be utilizing the next ip deal with and subnet setu p:

* Wi-fi Router 1 = Linksys WRT160n 192.168.1.0/24
* Wi-fi Router 2 = Linksys WRT54GS-WRT mod 10.0.1.0/24

The Linksys WRT 160n wi-fi router can be instantly related to the Web service, and the Linksys WRT54GS DD-WRT modded router will create the wireless link between the 2 routers. The best way to setup your wi-fi bridge is to have a laptop that has each a wifi connection and a ethernet connection. To start the set up, use your wi-fi connection to connect with router 1, which is the Linksys WRT160N. After you have related the router, open your internet browser and sort in the default gateway which ought to be 192.168.1.1. Click on the Status Tab and ensure that router 1 has a web connection.
After you realize that the primary router has a internet connection, go to the Wi-fi Safety Tab and setup the encryption type and paraphrase key. Just be sure you are using compatible encryption between both of the routers.linksys-wrt160n-wpa-wireless-security

After you've gotten set the encryption sort and key on the primary router, disconnect from this router. Now connect with the WRT54GS DD-WRT modded router, then go to the setup tab and alter the local network to 10.0.1.zero or whatever community vary you prefer.

* Local Ip Address: 10.0.1.1
* Subnet Mask: 255.255.255.0
* Gateway: 10.0.1.1
* Local Dns: 10.0.1.1

After you've gotten modified the network setup on your modded DD-WRT router, disconnect from the router then reconnect to so that you simply receive your new ip address. Your new ip tackle must be somewhere throughout the 10.0.1.zero network. Now open an online browser at level it in the direction of 10.0.1.1, w hich is now the default gateway in your WRT54GS DD-WRT modded router.

Now go to the standing tab and click on the wi-fi tab. Within the wi-fi tab it's best to see a button that says website survey. The positioning survey button is located in direction of the bottom of the page. All you must do now's select router 1 from the checklist, which must be the Linksys WRT160N.

After you might have selected router 1 from the listing, go to the wireless tab and click on on the wi-fi security tab. All it's a must to do now could be input the exact same encryption sort and key that you just setup for router 1. After you will have set the encryption type and key into ybur modded DD-WRT router, all you need to do is apply the settings. You must now have a wi-fi hyperlink between the Linksys WRT160N and the Linksys WRT54GS. Now join utilizing a wireless connection to the DD-WRT modded router, and ensure your internet connection work.

access point vs router