192.168.1.1 ? What Does It Stand For?

While you are considering the meaning as well as the rationale of 192.168.1.1, and it is extremely useful to be aware of what it actually stands for. An Internet protocol which is commonly called as the IP address is a classification number. This particular identification number is set to be unique for every single device that is set within a particular network and consists of 4 different numbers that are separated by 3 dots. In case you do not have any Internet Protocol address available, it is truly impossible for you to classify the location or the network interface of the particular device. The most commonly used one in the present times is the Internet Protocol Version four, However Internet Protocol Version six was regularized by RFC 2460 in year 1998, anticipating that the requirement for the Internet Protocol addresses will simply increase with every passing day thus reducing the availability and accessibility of the Internet Protocol Version four addresses with the passage of time. The IPv4 was designed as 32-bit number; however the IPv6 happens to be a 128-bit number that mainly comprises of 8 characters that are not separated by dot but are separated by colons. For IP addresses, the term �Private� is normally used for all those that vary from 192.168.0.0 � 192.168.255.255. These have been brought into subsistence because of the shortfall concerning the accessibility of the remaining Internet Protocol Version four addresses. The primary basis why all such Internet Protocol addresses are referred to as �Private� is for the reason that all of them are simply non-routable without making use of a NAT, it is simply impossible to identify a device that is outside the particular network it is basically set up in. The IP address as 192.168.1.1 happens to be a privatized Internet Protocol address that has been used by a large number of broadband router vendors as the default Internet Protocol address for their devices. google_ad_client = "pub-2311940475806896"; /* 300x250, created 1/6/11 */ google_ad_slot = "0098904308"; google_ad_width = 300; google_ad_height = 250; You need to keep this point in mind that two different devices can make use of the same Internet protocol address exclusive of any issues whatsoever, provided with the fact that they exist is different networks. 192.168.1.1 is the default Internet Protocol address used by most of the router manufacturers, however it is not something hard to modify. As a matter of fact, you can without problems opt for your very own network IP address as per your convenience via the Administrative panel. Netgear, Speedtouch, Westell and Linksys are some leading broadband router vendors that make use of the RFC stated 192.168.1.1 as default IP address for their devices which leads to easier and convenient configuring procedures especially for new users.

access point vs router