Microsoft 74-134 Free Download - Education - Study Techniques

Pre-installing Microsoft Products and Technologies 74-134 Test

74-134

QUESTION 1:

You are a system builder at testkingworld .net.Your network uses a Microsoft Windows Server? 2003 that is running the Dynamic HostConfiguration Protocol (DHCP) service and is set up as a technician computer. Youinstalled OPKTools from Microsoft Windows? XP Service Pack 2.You want to set a static Internet Protocol (IP) address for the Microsoft WindowsPreinstallation Environment on the computer that you are installing for your customer.During the preinstallation process, you receive the following error message: CannotAuthenticate to Server.What should you do? (Each correct answer presents part of the solution. Choose two.)

A. Edit the winbom.ini file in the WinPE.net section to include the Gateway= parameter.B. Edit the winbom.ini file in the WinPE.net section to include the StartNet= parameter.C. Edit the winbom.ini file in the WinPE.net section to include WinPEFirewall=On.D. Edit the winbom.ini file in the WinPE.net section to include the IPConfig= parameter.

Answer: A,D

QUESTION 2:

You are a system builder at testkingworld .net.Your network is using a four-port router that is running the Dynamic Host ConfigurationProtocol (DHCP) service. Your technician computer runs Microsoft Windows? 2000Professional and is connected to the four-port router.You have installed a media reader card in a computer, and you use OPKTools topreinstall this computer over the network. In Audit mode you discover that the mediacard reader device has failed and that it is not enumerated in Device Manager.You need to preinstall your computers with this card reader.What should you do? (Each correct answer presents part of the solution. Choose two.)

A. Add the DriverSigningPolicy=Ignore parameter in the Unattended section of theunattend.txt answer file to preinstall the unsigned driver.B. Remove the incorrect driver that was installed.C. Add the DriverSigningPolicy=Warn parameter in the Unattended section of theunattend.txt answer file.D. Obtain an updated driver (if one exists) from the manufacturer.E. Run sigverif.exe from a command prompt to verify that all the drivers are signed.F. Add the DriverSigningPolicy=Block parameter in the Unattended section of theunattend.txt answer file.

Answer: A,D

QUESTION 3: 74-134

You are a system builder at testkingworld .net.Your network is using a four-port router that is running Dynamic Host ConfigurationProtocol (DHCP). Your technician computer runs Microsoft Windows? 2000Professional and is connected to the four-port router. You have created a configurationset by using OPKTools.When you attempt the preinstallation on a new computer, you find that the hard drive isnot formatted correctly. You open the winbom.ini answer file in the configuration set,and you see the following:[Disk1.config]Size1 = *PartitionType1 = PRIMARYFileSystem1 = NTFSQuickFormat1 = YESYou need to perform an unattended preinstallation of Microsoft Windows on three newcomputers that you are shipping to customers.What should you do? (Each correct answer presents part of the solution. Choose two.)

A. Add Wipe Disk=Yes to the winbom.ini answer file.B. Add SetActive1=Yes to the winbom.ini answer file.C. Change Size1=* to Size1=10000 in the winbom.ini answer file.D. Change QuickFormat1=YES to QuickFormat1=NO in the winbom.ini answer file.

Answer: A,B

QUESTION 4:

You are a system builder at testkingworld .net.The company network is not functional, and there is no network access to the techniciancomputer. You need to preinstall Microsoft Windows? operating systems on threecomputers. You have three copies of the Windows operating systems.You have decided to use a winnt.sif file to perform a Windows CD-based preinstallationon these computers. You manually create a winnt.sif file and copy it to three floppydisks. You place a CD of each Windows operating system in the DVD drive of eachcomputer. You start each computer.When you see the initialization screen on each computer, you insert the floppy disk withthe winnt.sif file on it into each computer. Two of the computers are preinstalledproperly. The third computer, however, begins the preinstallation process but stops withthe command prompt window open and the cursor at D:i386System32.You need to preinstall the third computer.What should you do? (Each correct answer presents part of the solution. Choose two.)

A. Remove the CD from the drive, clean it, and begin the process again.B. Check the Hardware Compatibility list to make sure that all hardware is compliant.C. At the command prompt, type ipconfig /all to make sure that Transmission ControlProtocol/Internet Protocol (TCP/IP) is bound to the adapter.D. Remove the Microsoft Windows OEM Preinstallation Kit (OPK) CD from the DVD 74-134

drive and place the Windows operating system CD into the DVD drive.

Answer: B,D

QUESTION 5:

You are a system builder at testkingworld .net.Your network uses a Microsoft Windows Server? 2003 that is running the Dynamic HostConfiguration Protocol (DHCP) service and is set up as a technician computer.You installed OPKTools from Microsoft Windows? XP Service Pack 2. You run SetupManager and create a configuration set to install a Microsoft Windows operating system.You edit the winbom.ini file in the configuration set and copy the winbom.ini file to afloppy disk. You boot the master computer by using your Microsoft WindowsPreinstallation Environment CD, and you insert the floppy disk with the winbom.ini file.You get the following error message: Cannot Authenticate to the Server.What should you do? (Each correct answer presents a complete solution. Choose two.)

A. Verify that the passwords used for connecting are the same in the configuration setand on the floppy disk.B. Verify that the Gateway= parameter is included in the winbom.ini answer file.C. Verify that the StartNet=yes parameter is included in the unattend.txt answer file.D. Verify that the network interface card in the master computer is plugged in to thecrossover cable.

Answer: A,B

QUESTION 6:

You are a system builder at testkingworld .net.You have a four-port router that is running the Dynamic Host Configuration Protocol(DHCP) service. You are using a computer running Microsoft Windows? 2000Professional as your technician computer.You have created a configuration set and are using the following winbom.ini file toinstall the network drivers:[PnpDrivers]| \opktoolsdriversChipset = Chipset| \opktoolsdriversvideo = video| \opktoolsdriversAudio = Audio| \opktoolsdriversModem = Modem| Username = opk| Password =| [PnpDriverUpdate]| WaitForPNP = YES| TargetRoot = WindowsOEMdrivers| UpdateInstalledDrivers = NoWhen you run the preinstallation, your updated drivers are not installed. 74-134

You need to install updated drivers.What should you do? (Each correct answer presents part of the solution. Choose two.)

A. Include the OEMPnPDriversPath parameter in the PnPDriverUpdate section of thewinbom.ini file.B. Remove the username and password parameters in the PnPDrivers section. Place themin the PnPDriverUpdate section.C. Change the WaitForPnP=Yes parameter to WaitForPnP=No.D. Remove lines in PnPDrivers section to only include \opktoolsdrivers = drivers.E. In the PnPDrivers section,change UpdateInstalledDrivers=No toUpdateInstalledDrivers=Yes.

Answer: B,E

QUESTION 7:

You are a system builder at testkingworld .net.Your network uses a Microsoft Windows Server? 2003 computer that is running theDynamic Host Configuration Protocol (DHCP) service.You create a configuration set for a Microsoft Windows Small Business Server 2003installation and preinstall a computer for your customer. You create the directorySysprep and copy all the necessary files into this folder. You then run sysprep on thecomputer by using the following command: C:SysprepSysprep.exe -dc ?? *?Creseal.You reboot the computer and receive the following error: LSASS.EXE - System Error.What should you do?

A. Use the OEM version of Windows Small Business Server 2003.B. Use the MSDN version of Windows Small Business Server 2003.C. Use an open-license version of Windows Small Business Server 2003.D. Use the Retail version of Windows Small Business Server 2003.

Answer: A

QUESTION 8:

You are a system builder at testkingworld .net.Your network is using a four-port router running Dynamic Host Configuration Protocol(DHCP). Your technician computer is running Microsoft Windows? 2000 Professionaland is connected to the four-port router.You have created a configuration set by using the OPKTools specified for use inpreinstalling Microsoft Windows on three computers. You have the Microsoft WindowsPreinstallation Environment CD from a three-pack of CDs for Microsoft Windows XPProfessional. You start the Windows Preinstallation Environment CD on one of thecomputers and find that Windows Setup stops. You receive an error message stating thatyour Product Key is missing or invalid.You need to perform an unattended installation of Windows without producing this error.

Original Resource :

Visit 74-134 Link : 74-134 Download PDF Link : 74-134

access point vs router