Cisco 351-001 Actual Exam - Education - Study Techniques

CCIE Routing & Switching v4.0 Written Exam Topics (Beta) 351-001 Test

Exam Name: CCIE Routing & Switching v4.0 Written Exam Topics (Beta)Exam Type: CiscoExam Code: 351-001 Total Question 238

Question: 1Lafayette Productions is looking for a new ISP that has improved availability, load balancing, andcatastrophe protection. Which type of ISP connectivity solution would be best?

A. Single runB. Multi-homedC. Stub domain EBGPD. Direct BGP peering

Answer: B

Question: 2Net Flow provides valuable information about network users and applications, peak usage times,and traffic routing. Which function is of Net Flow?

A. Monitor configuration changesB. Monitor CPU utilizationC. Monitor link utilizationD. Generate traps for failure conditions

Answer: C

Question: 3The P4S company is deploying OSPF on a point-to-multipoint Frame Relay network. The remotesites needn??t to communicate with each other and there are a relatively small number of sites(scaling is not a concern). How to configure OSPF for this topology in order to minimize theadditional routing information injected into the network and keep the configuration size andcomplexity to a minimum?

A. Configure the link as OSPF no broadcast and manually configure each of the remote sites as a neighbor.B. Configure the link as OSPF broadcast and configure the hub router to always be the designated router.C. Configure the link as OSPF broadcast and configure a mesh group towards the remote routers.D. Configure the link at the hub router as OSPF point-to-multipoint and at the remote routers asOSPF point-to-point.

Answer: B

Question: 4What is high availability?

A. Redundant infrastructureB. Clustering of computer systemsC. Reduced MTBFD. Continuous operation of computing systems

Answer: D

Question: 5What is the way that an OSPF ABR uses to prevent summary route information frombeingreadvertised from an area into the network core (Area 0)?

A. It advertises only inter-area summaries to the backbone.

Page 1 of 84Exam Name: CCIE Routing & Switching v4.0 Written Exam Topics (Beta)Exam Type: CiscoExam Code: 351-001 Total Question 238

B. It uses poison reverse and split horizon.C. It only sends locally originated summaries to the backbone.D. It compares the area number on the summary LSA to the local area.

Answer: C

Question: 6Connecting an IS-IS router to four links and redistributing 75 routes from RIP. How many LSPswill be originated by this router?

A. One LSP: containing the router information, internal routes, and external routesB. Six LSPs: one for each link, one containing router information, and one containing external routing informationC. Two LSPs: one containing router information and internal routes and one containing external routesD. Three LSPs: one containing all links, one containing router information, and one containing external routing information

Answer: A

Question: 7According to the network in this exhibit, traffic directed towards 10.1.5.1 arrives at P4S-R4. Whichpath will the traffic take from here?

A. It will take P4S-R2.B. It will not take any path. P4S-R4 will drop the traffic.C. It will take P4S-R3.D. It will load share between P4S-R2 and P4S-R3.

Answer: A

Question: 8You are the Cisco Network Designer in P4S. Which two characteristics are most typical of aSAN? (Choose two.)

A. NICs are used for network connectivity.B. Servers request specific blocks of data.C. Storage devices are directly connected to servers.D. A fabric is used as the hardware for connecting servers to storage devices.

Answer: B, D

Question: 9The IGP next-hop reach ability for a BGP route is lost but a default route is available. Assumingthat BGP connectivity is maintained, what will happen to the BGP route?

A. It will be put in a hold-down state by BGP until the next hop has been updated.B. It will be removed from the BGP table.C. It will be considered a valid route.D. It will be considered invalid for traffic forwarding.

Answer: C

Question: 10

Page 2 of 84Exam Name: CCIE Routing & Switching v4.0 Written Exam Topics (Beta)Exam Type: CiscoExam Code: 351-001 Total Question 238

In the network presented in the following exhibit, all routers are configured to perform EIGRP onall interfaces. All interface bandwidths are set to 1000, and the delays are configured asdisplayed. In the topology table at Router P4S-RC, you see only one path towards 10.1.1.0/24.Why Router P4S-RC only has one path in its topology table?

A. Router P4S-RB is not advertising 10.1.1.0/24 to Router P4S-RC due to split horizon.B. Router P4S-RD is not advertising 10.1.1.0/24 to Router P4S-RC because Router P4S-RC is its feasible successor.C. Router P4S-RD is not advertising 10.1.1.0/24 to Router P4S-RC due to split horizon.D. Router P4S-RB is not advertising 10.1.1.0/24 to Router P4S-RC because Router P4S-RC is its feasible successor.

Answer: C

Question: 11How many broadcast segments are contained in this network according to the exhibit?

Page 3 of 84Exam Name: CCIE Routing & Switching v4.0 Written Exam Topics (Beta)Exam Type: CiscoExam Code: 351-001 Total Question 238

A. 1B. 2C. 4D. 5

Answer: B

Question: 12Which VPN management feature would be considered to ensure that the network had the leastdisruption of service when making topology changes?

A. Dynamic reconfigurationB. Path MTU discoveryC. Auto setupD. Remote management

Answer: A

Question: 13What information can you get from TCP flags while assessing an attack?

A. Source of the attackB. Type of attackC. Target of the attackD. Priority of the attack traffic

Answer: B

Question: 14Which two steps can be taken by the sinkhole technique? (Choose two.)

A. Reverse the direction of an attackB. Redirect an attack away from its targetC. Monitor attack noise, scans, and other activity

Page 4 of 84

Original Resource :

Visit 351-001 Link : 351-001 Download PDF Link : 351-001

access point vs router