Maintain Internet Signal By Configuring Router Settings - Computers - Hardware

Before handling routers, the internet users must know that it is a complicated device to deal with, and if you have to configure it, you may take the help of UK computer services. Routers are essential for offering the users additional security and guidance on the Internet signal. The wrong router setting can make you decrease the security levels and also shut off the wired access. It will be advisable to have a notebook by your side, and jot down any changes that you make while changing the router settings. This will help you undo the damage caused if the setting does not work or plays havoc.

Before making any change in the router settings, the user must unplug the modem as well as the router, and then switch off the computer. The router must be connected to the system with an Ethernet cord. You have to now wait for the connection to happen after plugging in the modem. Watch out for the lights on the router; they will start blinking very fast before they stabilize. Once the lights are stabilized, the user knows that the connection has occurred. If there is problem in getting a connection established, the user must a UK computer support provider.

With the successful connection establishment, the users may plug in the router and then switch on the computer system. The router you have has come with a manual, so take a look at it for the setup website address. The next step will be to open a web browser and enter the setup web address and then find the administrative username as well as the password. The username along with the password can usually be found next to the setup wed address. If you are unable to locate the username and password, seek the services of a UK remote tech support provider.

What should the next step be? Well, now the user has to enter the administrative username and the password in the respective fields. The user must make a change in the Wireless Network Name (SSID); this field identifies the network. This will denote the name of the connection, when the wireless connection is being sought. Have a name that will help you recognize it later on easily. After you are satisfied with the change, click on Save Settings.

Now the user will be required to change the Security Mode to Wi-Fi Protected Access (WPA) or may be to Wireless encryption (WEP). The user must note that these modes are the most secure. After you have successfully made the change, you must click on the option called Save Settings. You have to now select a router password; this password will be required when the user wants get on the internet. With this option, others do not have access to your network and cannot slow down your system. Again click on Save Settings and close the web browser you are using.

Having completed these tasks, disconnect the Ethernet cord from your system to the router. This should give you a wireless connection. For further assistance on this and any other computer related issues, you will be benefited to contact a UK computer help service.

access point vs router